Blind spots around heavy equipment can result in damage to equipment and injury or even loss of life. RMT has a solution.RMT has developed Track-Vision, a safety camera designed to eliminate the blind spots surrounding heavy equipment. The blind spots of heavy equipment most commonly occur at the front or rear of the vehicle, although certain equipment types also have blind spots to the side.
All camera adjustments are made directly from the monitor, and the camera can be set to turn on when the machine reverses and turn off when the machine drives forward, or it can remain on while the machine is operating. The camera casing is nitrogen filled and 100% watertight. It has a heated lens surface to prevent condensation or frost and a 115% wide-angle view. The camera is very accurate in low-light, and can “see” better than a human eye in these conditions. The monitor is 100% waterproof, is shockproof and vibration resistant, has an integrated sun cover, and the monitor brightness automatically adjusts to the amount of daylight.
The standard installation includes one heavy-duty camera mounted at the back of the vehicle and a 7 inch colour flat screen LCD installed in the cab. Additional cameras can be installed around the vehicle depending on where the greatest risks are. The camera can also be used for precision work, such as when an excavator operator has limited visibility, where the camera can be mounted on the dipper stick. Source: www.track-vision.com